Industrial Anti-Slip Stair Covers
Smooth or worn step edges are leading contributors to severe or even fatal slip and fallaccidents, however this hazard can be easily eliminated. ANTI-SLIP STAIR COVERS (NOSINGS) are non-structural safety covers designed to be very easily fitted over the front edge of most types of existing stair treads including timber, concrete, steel and open grille. They are tough, extremely durable high traction products that will prevent slippage even under the most harsh conditions or the heaviest soiling. Importantly the contrasting colour of ANTI-SLIP STAIR COVERS (NOSINGS) clearly defines the edge of each stair tread preventing over-stepping and fall accidents.
Most slip accidents on steps occur through your foot slipping at the leading edge of a step. This is especially the case when the leading edge of the metal, wood or concrete step surface becomes worn and the edge rounded. Water, ice, dust, dirt, grease or oil on the stairs further accentuates the problem, making for a particularly dangerous condition.
ANTI-SLIP STAIR COVERS (NOSINGS) are designed to transform this danger zone on steps into a safe, high traction, well contrasted safety surface that is safe under all conditions.
These products are pre-finished, ready to install covers constructed from extremely robust composite fibre reinforced plastic (FRP). All elements of the stair nosing are bonded together in a single manufacturing process making for the strongest and most durable stair safety product available today.
Key features of our FRP material include:
- 100% rust and corrosion resistant.
- Guaranteed against delamination and chipping.
- High impact and wear resistance.
- Extreme environmental and UV resistance.
- Highly resistant to chemical attack.
- Flame retardant.
- Colour fast.
- Lightweight.
- Available with in-built Glow In The Dark capability.
ANTI-SLIP STAIR COVERS (NOSINGS) can be very easily installed to all stair types using basic fastening systems in just seconds without the risk of being loosened by vibrations or heavy use.
Level
surface walkways can often be just as dangerous as stairways,
especially when water, oil or other lubricants are involved. Fitting
high traction and high visibility ANTI-SLIP WALKWAY COVERS over
your existing walkway surface is a fast, permanent and highly effective
way to enhance safety and clearly delineate dedicated safe walkway
zones.ANTI-SLIP WALKWAY COVERS are lightweight yet incredibly strong high traction sheets available in a wide range of sizes that simply fix directly over your timber, concrete, steel or open grate flooring. They can be laid end to end to create a continuous surface or laid heel to toe with spacing up to 150mm (6”) between sheets so that either heel or toe contact is achieved.
ANTI-SLIP WALKWAY COVERS can also be supplied with glow in the dark emergency, directional and safety information inset into the cover to assist with the identification of emergency exits and safety equipment, even in conditions of total darkness.
These products are pre-finished, ready to install covers constructed from extremely robust composite fibre reinforced plastic (FRP). All elements of the ANTI-SLIP WALKWAY COVER are bonded together in a single manufacturing process making for the strongest and most durable floor safety product available today.
Key features of our FRP material include:
- 100% rust and corrosion resistant.
- Guaranteed against delamination and chipping.
- High impact and wear resistance.
- Extreme environmental and UV resistance.
- Highly resistant to chemical attack.
- Flame retardant.
- Colour fast.
- Lightweight.
- Available with in-built Glow In The Dark capability.
- Indefinite life span
Sagita Magnolia Limited
65 Oduduwa Crescent, Off Oduduwa Way, Ikeja, GRA, LagosTel:
Port Harcourt
4/6 Obagi Street,
GRA Phase 1, Port Harcourt, Rivers State
Tel: +234-8063 350 690
USA: 24819 Dutton Point Drive, Katy.
TX 77493
E: Info@sagitamagnolia.com
W: www.sagitamagnolia.com
